Yokogawa AC8 Calibration Units - Manual (Page 17)

17
IM 11M06D03-01E-A
VIII. CALIBRATION SETUP & OPERATION, ZR402G
8.1 ZR402G TOUCH PANEL SWITCH OPERATIONS
The converter uses a touch panel switch which can be operated by just touching the panel display. Figure 8.1 shows
the basic panel display. The switches that appear in the switch display area vary depending on the panel display,
allowing all switch operations. Figure 8.2 shows the switch functions.
FIGURE: 8.1
Tag name display area: Displays the set tag name (Refer to Section 10.1.4, “Entering Tag Name”).
Primary to tertiary display items: Displays the selected item. (Refer to Section 7.9, “Setting Display Item”.)
Switch display area: Displays switches and functions selected according to the panel display.
Alarm and error display area: Displays an error if an alarm or error occurs. If you touch this area, the
details of the error or alarm are then displayed.
FIGURE: 8.2