Yokogawa Touch Screen GP20 - Manual (Page 32)

3-2
IM 04L61B01-01EN
Color Overview Display
Shows waveforms whose displays are turned on
Shows cursors, marks, and triggers
The color overview display shows the measured values of the entire data source using
different colors. Values between the minimum and maximum values of the scale are mapped
to 50 different colors, and measured values are displayed using these colors.
For display data, the maximum and minimum values are displayed, respectively, in the top
row and bottom row in the space allotted for the waveform. For event data, instantaneous
data is displayed in a single row.
If you move the cursor over a color bar, the waveform number will appear. If you click or drag
the color bar, the corresponding section of the waveform appears in the waveform display
area.
Note
By default, the color overview is hidden.
To show it, drag the horizontal splitter at the top of the tabbed page down.
3.1.2 Setting Display Group Details
To assign channel data to waveforms, use the Display Group Setting dialog box. This dialog
box enables you to set channel groups and how to display the window.*
* The items that you set in this dialog box apply to the tabbed pages of the waveform display,
digital display, and circular display. They also apply to the data display of the respective
windows. For details on the display locations that these settings apply to, see the note on page
3-8.
Procedure
1
To configure display group settings, on the View menu, click Display Group Setting.
Or, click the Display Group Setting button.
The Display Group Setting dialog box appears.
3.1 Displaying Waveforms