Yokogawa Touch Screen GP20 - Manual (Page 89)

4-1
IM 04L61B01-01EN
Saving and Printing Data
1
2
3
4
5
6
7
8
9
10
11
12
App
Index
4.1 Saving Display Conditions
You can save the conditions for displaying data files and alarms that you have added on
Universal Viewer as display condition files.
4.1.1 Saving a Display Condition File
If you save display conditions, the next time you open the same data file, the file will open
using the saved display conditions.
Procedure
1
On the File menu, click Save Display Setting. Or, click Save Display Setting on the
toolbar.
A display condition file (.vdx extension) will be saved in the same folder as the displayed data file.
Note
• Separate display condition files are created for display data files, event data files, and TLOG
data files. The file name will be the same as the name of the data file but with a .vdx extension.
The file will be saved in the same folder as the data file.
• When you close a data file, if the display conditions have been changed, a message “Save
changes?” will appear. Clicking Yes overwrites the display condition file.
• Display condition files can be overwritten over and over again. You can also delete unneeded
display condition files.
Explanation
The table below shows the display conditions that are saved to display condition files (.vdx
extension).
Display Condition File of Display Data Files and Event Data Files
Conditions That Are Saved
Time axis display mode (absolute or relative)
Alarm display on/off
Channel identification string mode (channel, tag No., or tag comment)
Cursor A and B positions
Color overview display on/off Waveform display
Size of the color overview display area Waveform display
Y-axis clip on/off Waveform display
Cursor value display on/off Waveform display
Cursor value display transparency Waveform display
Image show/hide and size Waveform display
Mark note information Waveform display
Size of the Y-axis display area Waveform and circular displays
Waveform thickness Waveform and circular displays
Y-axis zone assignment Waveform and circular displays
Y-axis grid line density Waveform and circular displays
Legend display on/off Waveform and circular displays
Legend display mode Waveform and circular displays
Time axis grid line density Waveform and circular displays
Active waveform
Active Y-axis
Selected group
Alarm display (inside or outside) Circular display
Time axis circular display cycle Circular display
Selected commands on the View menu of the digital display Digital display
Print settings (Print Setup dialog box)
File information item on/off and print comment
Chapter 4 Saving and Printing Data