Yokogawa Touch Screen GP20 - Manual (Page 95)

4-7
IM 04L61B01-01EN
Saving and Printing Data
1
2
3
4
5
6
7
8
9
10
11
12
App
Index
Note
• When printing a manual sampled data file or report file, steps 2 and 3 (header specification) are
not available.
Header information details: section 2.4, “Viewing Data File Information”
• When printing a manual sampled data file, TLOG file, or report file, steps 4 and 5 (print settings)
are not available.
Explanation
Print Range
You can specify the print range by selecting all the data displayed, the range between
cursors A and B, or a time range. If you set the print range to Specify Time, enter the start
and end times.
If you select Cursor but there are no cursors, the start and end times of recording will be the
range.
Print Graph Format
You can select 1 page to print the specified range in the waveform display on one page or
Multiple Pages to print at fixed pitches.
When Multiple Pages is selected, the times of the waveform graph grid are mapped to the
fixed pitched scale lines and printed.
Line Thickness
Specify the line thickness to use in the waveform and circular displays.
Print Graph Grid
Specify the grid line spacing and auxiliary grid lines to use during waveform display printing.
Set Print Graph Grid first and then Sub Grid. The Sub Grid options vary depending on the
Print Graph Grid setting.
Split Circular Interval
Specify the cycle and time-axis auxiliary grid lines to use during circular display printing.
Set Split Circular Interval first and then Sub Split. The Sub Split options vary depending
on the Split Circular Interval setting.
Y Axis Column Num
Specify the Y-axis scale to use during waveform or circular printing in terms of the number of
columns.
Specify to which column from the right of the Y-axis to print (including the active Y-axis). The
columns of the active Y-axis are prioritized, and the Y-axis will be printed to the specified
number of columns from the right.
For example, if you specify the number of columns to 1, only the active Y-axis will be printed.
If you enter 3, the active Y-axis and the two Y-axes from the right are printed.
Color Mode
Specify black and white print or color print.
Print Color
You can specify different colors for the marks placed with the recorder and those placed with
the software.
Comment
You can enter a print comment. The comment that you enter here is the same as that in the
About Document dialog box described in step 2. Up to 128 characters are displayed.
4.3 Printing