Setting the y-axis, Setting the y-axis -11, Index setting the y-axis – Yokogawa Value Series FX1000 User Manual
Page 20
2-11
IM 04L21B01-63EN
Displaying Data
1
2
3
Index
Setting the Y-axis
Selecting the Waveform Display Zone
User zone
Edit zone
Full zone
Slide zone
Auto zone
Multi-axis zone
Waveform display limit
([Y-Axis] - [Clip])
Click one
([Y-Axis] - [User Zone]/[Edit Zone]/[Full Zone]/
[Slide Zone]/[Auto Zone]/[Multi-Axis Zone])
Select from the following list of choices:
• User zone:
Each waveform is displayed in the range specified in [Zone] under
the [General Display Setting] (the zone cannot be changed on the
waveform display screen).
• Edit zone:
Each waveform is displayed in the range specified in [Zone] under the
[General Display Setting] (the zone can be changed on the waveform
display screen).
• Full zone:
Display all waveforms using full zones.
• Slide zone:
Display the waveforms in a cascade fashion from the top to the
bottom of the waveform display area.
• Auto zone:
Display the waveforms by equally dividing the waveform display area
by the number of displayed waveforms.
• Multi-axis zone: Display the Y-axis of multiple waveforms.
Note
If the waveform display zone is set to some setting other than multi-axis zone and auto zone,
only the Y-axis of the active waveform is displayed.
Examples of the Various Zone Settings
• Full zone
• Slide zone
Full zone
Slide zone
2.2 Displaying the Waveform