Yokogawa Value Series FX1000 - Manual (Page 31)

2-22
IM 04L21B01-63EN
Setting the Time Axis
Selecting absolute or relative time display and zooming in or zooming out
on the time axis.
See section 2.2, “Displaying the Waveform.”
Selecting the displayed time
Specify the display time of a single cycle by setting the [TimeAxis] on the menu bar. The
options are as follows:
[1 hour], [2 hours], [6 hours], [8 hours], [12 hours], [16 hours], [1 Day], [2 Days], [1 week],
[2 weeks], and [4 weeks]
Setting the Y-axis
Setting Waveform Display Limits
The circular screen always displays the waveform that is limited to the values between
the maximum and minimum values of the Y-axis display range. The range is set using
[Scale] in the [General Display Settings] dialog box.
Turning ON/OFF the Alarm Display
You can display alarms in the inside or outside of the circular screen’s waveform display.
1. Click the alarm display icon on the toolbar, or select [View] - [Alarm] on the menu
bar.
The alarms are displayed.
2. On the menu bar, select [View] - [Alarm Inside] or [View] - [Alarm Outside].
Alarm Inside Alarm Outside
2.3 Circular Display