Yokogawa Value Series FX1000 - Manual (Page 50)

2-41
IM 04L21B01-63EN
Displaying Data
1
2
3
Index
2.12 Printing
You can print a display data file, event data file, manually sampled data file, or report file.
Setting the Printer
1. On the menu bar, select [File] - [Print Setup].
2. Set the printer, paper and orientation.
Note
Set the printer according to the configuration of the system that you are using.
Specifying the Contents to Be Printed (for Display Data File and Event Data File)
Specify the contents to be printed before executing the print. This setting is not necessary
if you are printing a manually sampled data file, or report file.
On the menu bar, select [File] - [Print Settings] from the menu. The [Printout Setup]
dialog box opens. When the waveform is displayed, printing is carried out according
to the settings under the Graph Print tab of the [Printout Setup] dialog box. If numeric
values are displayed, printing is carried out according to the settings under the Sheet
Print tab.
Setting Graph Print
Click this tab to set the graph print
Set the range, color, print group, and comment,
then click the [OK] button