Specifying data types, Specifying keywords, Specifying data types -8 – Yokogawa DAQWORX User Manual
Page 20: Specifying keywords -8, Specfyng data types, Specfyng keywords
2-8
IM WX201-01E
Specfyng Data Types
Procedure
1.
Specify a search folder. (See section 2.2)
2.
Select the Data Type check box in the Search conditions area.
3.
Click the Data Type tab or click the word “Data Type” to the right of the check box.
The Data Type tab is displayed.
Click to the right of each item to change the tabs on the right.
Check box
4.
Select the types of data to search for.
Explanaton
Data type specification allows you to search for files of the specified instrument or PC
software.
Data Types
DAQLOGGER, AddMulti, AddTrigger, MX100 (data file created on the MX100 or with
the MXLOGGER software or the MX100 standard software), DX100/DX200, MV100/
MV200, and CX1000/CX2000, FX100
Specfyng Keywords
Procedure
1.
Specify a search folder. (See section 2.2)
2.
Select the Keyword check box in the Search conditions area.
3.
Click the Keywords tab or click the word “Keywords” to the right of the check box.
The Keywords tab is displayed.
Click to the right of each item to change the tabs on the right.
Check box
4.
Select a search key, then enter a keyword or keywords to search for.
2.3 Specfyng Search Condtons