Yokogawa DAQWORX - Manual (Page 59)

3-23 IM WX201-01E
Operat
on of the T
rend D
splay W
ndow
1
2
3
4
Index
3.8 Convertng Data Formats
Procedure
1. Open the waveform display screen and display the waveforms of the data you
wish to convert.
2. Select a range to convert using the cursors (if no cursors are displayed all data
will be converted). Click in the waveform display screen toolbar. The Data
Conversion dialog box opens.
Select the check box of
the desired conversion
type to turn it ON
3. Select a conversion type of Excel, Text, or Lotus. To change the range of data to
be converted, specify a Start and End point.
4. Enter the number of steps. (See Explanation for details.)
5. To select a channel whose interval is to be used for the interval during data
conversion, select the Write Measured point of the following channel check box
and click the Select button. The Selection dialog box opens. (See Explanation for
details.)
Select the channel for output of measured points
6. If you click channel whose measured points are output, that channel is displayed
in the Data Conversion dialog box.
7. Click the Fle button. The File name dialog box opens.