Yokogawa DAQWORX - Manual (Page 23)

2-11 IM WX201-01E
Operat
on of the Data Search W
ndow
1
2
3
4
Index
2.4 Executng the Search
Procedure
1. Specify search folders and search conditions. (See sections 2.2 and 2.3)
2. Click the Search button in the Search conditions area. (Select the Search
subfolders check box if necessary.
The Search status dialog box appears.
When searching
Changes to the Close button when the serach stop.
Click to view contents of the error
Explanaton
Host Name
Displays the name of the host containing the specified search folder.
Folder ID
Displays the folder ID of the specified search folder.
Status (left)
Displays the search status.
Starting → Searching → Receiving data in progress ...% → Finished
Error: An error occured during the search.
Stop: Press to stop the search.
Status (rght)
Displays the results of the search. The number to the left of the slash indicates the
number of files that matched the criteria, and the number to the right represents the
total number of files searched. The number of files that can be searched from a single
registered folder ID is sixty thousand. Once that limit is reached, the search stops.
Error button
If an error occurs, the button becomes “ ” You can click the Error button to display
the contents of the error message.
Error
Displays the error number and message.
Total
Displays the total number of files found and searched.
Stop button
Stops the search. Once a search is stopped, the results obtained in progress are
displayed.
Close button
Closes the Search status dialog box. When the search stops, the Stop button changes
to the Close button.