Yokogawa Standalone MW100 - Manual (Page 27)

7
IM MW100-0E
Viewing Measured Data on the Monitor Screen and
Starting/Stopping Recording
In the browser monitor screen, you can view data being measured in a trend, numerical,
meter, or bar graph display. You can also start and stop recording, pause the monitor
display, write messages, and perform other functions.
1. Check whether the instrument is measuring by looking at the MW100 main
module’s status indicator, or in the browser’s top screen.
. From the browser top screen, click Single Screen or Dual Screen.
The Measured data screen appears.
Single Screen (Trend Display)
Computation start/stop button
Starts and stops computation (with the /M1 option,
or when the 10-CH Pulse Input Module is installed).
Recording Start/Stop button
Starts and stops data acquisition.
Pause button
Pauses monitor display updating.
Data acquisition does not stop.
Alarm ACK button
If set to hold alarms, alarms
are cleared upon alarm
clear wait.
(Includes relay action)
Output channel operation icons
(When output modules installed)
Area for displaying manual DO and
operation icons for arbitrary output.
Displays one channel’s worth.
Operational status
Illuminates during alarms,
recording, and computation.
Switch operation
icon
Switches the size
of the icon.