Yokogawa Standalone MW100 - Manual (Page 5)

5
IM MW100-0E
Checking the Contents of the Package
Unpack the box and check the contents before operating the instrument. If some of the
contents are not correct, or if any items are missing or damaged, contact the dealer from
whom you purchased them.
Checking the Model and Suffix Code
Check the model and suffix code on the name plate indicated in the figure below.
MODEL
S
SUFFIX MAC NO.
Instrument
number
Suffix code
Model
Style
number
Model
Suffix code
MAC address
Instrument
number
Style number
Main module Input/Output module
Base plate
Instrument number
Model
NO.
SUFFIX
STYLE
MODEL
NO. SUFFIX STYLE
MODEL
MODEL
S
SUFFIX MAC NO.
MODEL NO.
Note
When contacting the dealer from which you purchased the instrument, please give them the
NO. (instrument number) on the name plate.
Main Module
Model Suffix Code Description
MW100 Main module
Displayed
Language
-E English *1
Supply voltage -1 100 VAC-240 VAC
-2 12 VDC-28VDC, with AC adapter *2
-3 12 VDC-28VDC, without AC adapter *3
Power supply and
power cord
-D AC power: 3-pin inlet, UL/CSA Standard power cord
DC power: Screw terminal, UL/CSA cable for AC adapter
-F AC power: 3-pin inlet, VDE Standard power cord
DC power: Screw terminal, VDE cable for AC adapter
-R AC power: 3-pin inlet, AS Standard power cord
DC power: Screw terminal, AS cable for AC adapter
-Q AC power: 3-pin inlet, BS Standard power cord
DC power: Screw terminal, BS cable for AC adapter
-H AC power: 3-pin inlet, GB (CCC) Standard power cord
DC power: Screw terminal, GB (CCC) cable for AC adapter
-W Screw terminal, power supply cord not included *2, *3
Options /C2 RS-232 communications interface *4, *5
/C3 RS-422A/485 communications interface *4, *5
/M1 Mathematical function *5, *6
/M3 Report function
/SL1 10ch Quick Start Package *7
/SL2 20ch Quick Start Package *7
/SL3 30ch Quick Start Package *7
*1 Displays Celsius or Fahrenheit, Daylight savig time can be set.
*2 “W” cannot be selected with “-2.”
*3 “-3” can only be selected with “W”
*4 “/C2” and “/C3” may not be selected together.
*5 “/C2” or “/C3” must be selected to use the Modbus/RTU slave function. Also, “/M1” must be selected
for use of the Modbus/RTU master function.
*6 “/M1” must be selected to use the Modbus/TCP client function.
*7 “/SL1”, “/SL2”, and “/SL3” may not be selected together.