Yokogawa Standalone MW100 - Manual (Page 32)


IM MW100-0E
Changing the Display on the Waveform Display Window
Change the display settings according to the explanation in the figure below.
Switch the display group
Scale Turn ON/OFF the channel
Change the grid density
Channel number and measurement unit
Change the background
darkness
Zoom in or out
of the time axis
Switch the
display zone
Switch the active waveform
Alarm display ON/OFF
Clip display ON/OFF
Zone display area
ON/OFF
Move the cursor to
the point where the
alarm changed
Switch the grid display
Changing the Display Using the Toolbar
Change the display settings according to the explanation in the figure below.
Channel number display
Show the General Display Settings window
Tag name display
Tag comment display
Switching between Absolute and Relative time
Show the waveform display window
Alarm/Mark List
Show the numeric display window
Show the window for displaying cursor values
Adding marks
Move cursor A to the left mark
Move cursor A to the right mark
Move cursor B to the left mark
Move cursor B to the right mark
Show the window for displaying statistical computation over an area
Changing the Display Using the Menu
You can display the Edit, View, and Window menus.
Show the computation result display window
Show the window for displaying cursor values
Show the computation result display window
Add/delete a mark
Clear the Cursor
Search a mark
Switch between channel number, tag name,
and tag comment *1
Switch between absolute and relative time *2
Turn ON/OFF the toolbar
Turn ON/OFF the status bar
Arrange the display window
(select cascade or tile)
Arrange window icons
Show the waveform display window
Show the numeric display window
Switch the display window
*1 MW100 data do not have tag comments associated with
them. If you select Tag comment, the Tag name is displayed.
*2 Displays also the Format item during numeric display.
Select how to arrange the display area from auto, horizontal, and vertical
Change the data file display
Alarm/Mark detailed list display
Viewing Measured Data on the Viewer Software