Yokogawa DAQWORX - Manual (Page 31)

3-11 IM WX1-03E
1
2
3
Index
Deta
led Descr
pt
on of Funct
ons
Note
• Since the maximum number of parameters that can be acquired via communications on the
WT1800 is 255, all functions cannot be acquired on GateWT. To acquire functions not in the
table, you can set them in the WT1800's user-defined functions (F1 to F20).
• (/G5, /G6) can be selected on instruments with the harmonic measurement functions option,
(/DT) can be selected on instruments with the delta computation functions option, (/MTR)
can be selected on instruments with the motor evaluation functions option and (/AUX) can
be selected on instruments with the auxiliary input measurement functions option. If an
instrument without an option is selected, the group numbers shift to fill in the missing option.
For example, groups are assigned as follows for a 2-element model with (/G5) and (/Aux)
but without (/DT), (/MTR).
Group 1: Element1
Group 2: Element2
Group 3: ElemHrm1
Group 4: ElemHrm2
Group 5: SigmaA
Group 6: Other
Group 7: Aux
WT1800(2Elements model)
Group Strng Waveform Number Channel Assgnment
1 group Element1 W01—W20 URMS—AHM
2 group Element2 W01—W20 URMS—AHM
3 group ElemHrm1 W01—W06 UK_1—ITHD
4 group ElemHrm2 W01—W06 UK_1—ITHD
5 group SigmaA W01 URMS
W02 UMN
W03 IRMS
W04 IMN
W05 P
W06 S
W07 LAMBDA
W08 PHI
W09 WH
W10 WHP
W11 WHM
W12 AH
W13 AHP
W14 AHM
6 group Other W01—W24 ETA1—F20
7 group DeltaA (/DT) W01 DU1
W02 DU2
W03 DU3
W04 DUS
W05 DI
W06 DP1
W07 DP2
W08 DP3
W09 DPS
8 group Motor W01—W05 SPEED—PM
9 group Aux W01—W02
3.2 Detaled Descrpton of Functons