Venting (continued), Additional requirement for canadian installations – Sterling TC User Manual
Page 19
19
ADDITIONAL REQUIREMENT FOR CANADIAN INSTALLATIONS
REFER TO SPECIFICATION TABLE AND INSTALLATION MANUAL FOR PROPER USAGE.
* The following instructions apply to Canadian installations in addition to installation and operating instructions.
1. Installation must conform with local building codes, or in the absence of local codes, with current CSA B149.1, Installation Codes for Natural
Gas Burning Appliances and Equipment, or CSA B149.2, Installation Codes for Propane Gas Burning Appliances and Equipment.
2. Any reference to U. S. standards or codes in these instructions are to be ignored, and the applicable Canadian standards or codes applied.
VENTING (continued)
Figure 7 - Vertically Vented Tubular Unit Heater – Category I
Figure 8 - Horizontally Vented Tubular Unit Heater – Category III
D8929
D8930