AT&T 2812B - Manual (Page 24)

21
Telephone operation
Handset settings
Press OFF/
CLEAR
to cancel an operation, back
up to the previous menu, or exit the menu dis-
play. To return to the idle mode press and hold
OFF/
CLEAR
.
Dial type
In this menu, you can choose
TONE or PULSE
(rotary) dialing. The factory default setting is TONE.
Change this to PULSE only if you do not have
touch-tone dialing service.
1. Press
MENU/
SELECT
in idle mode to enter the
feature menu.
2. Use the
CID/-VOLUME
or
DIR /VOLUME+
to scroll
to the DIAL TYPE menu, press
MENU
/SELECT to
enter the menu when it is highlighted with a >
symbol.
3. Press the
CID/-VOLUME
or
DIR /VOLUME+
to
select TONE or PULSE.
4. Press
MENU
/SELECT to save your preference and
be returned to the feature menu.
NOTE: If you have more than one handset registered, dial
type change made on any one handset will apply to all.
DIAL TYPE: TONE
>
DIRECTORY
>
DIAL TYPE