UView MiST In-Car Air Quality System - Manual (Page 6)

Prepare Unit
Before you begin, see the
important safety information
on page 2.
Remove cap and seal from
cleaning solution bottle and
screw the bottle on to the
filling hole snuggly.
Press bottle downward to
compress the bottle and fill
the unit. (Photo A)
Ensure fluid level is above
minimum level (Photo B) and
cap is off exhaust vent.
Remove bottle and discard into
regular trash.
Position Unit
Place unit on the passenger
side floor close to the firewall
and point exhaust vent
towards the vehicle’s
air-intake. (Photo C)
Ensure the unit is level.
Center air bubble.
(Inset Photo C)
Start the vehicle. (Photo D)
Vehicle must be running for
the duration of the MiST™
treatment.
1 2
A
b
C
D
– 5 –