Nexo NEMO - Manual (Page 12)

NEXO NeMo User Guide v1.3
Page 12 of 50
THE NETWORK TAB
iPhone users only
On iPhone, the Network tab is made of the Groups & devices menu (see
The Groups & devices menu). All the following paragraphs apply to iPad
users only.
iPad users only
The main view shows the connected devices (NXAMPs and devices from
other manufacturers), as rectangular cells. Blue links between cells
represent the physical connections between EtherSound™ (only) devices.
A link is oriented from a master to its slaves thanks to an arrow.
To show or hide links, tap on or in the toolbar.
Map of the devices, map of the groups
The map of the main view can show either the devices (NXAMPs and
other devices) or the groups (see further how to create groups). To
activate the map of the devices or of the groups, tap on
[Devices] or
[Groups] in the toolbar.
Selection
The control of the NXAMPs 3 (see following tabs) is achieved with a system
of selection.
Double tap to select a cell. Its color is then shinier.
Double tap to deselect a cell. Its color is darker.
To select all the cells, tap on in the toolbar.
To deselect all the cells, tap on in the toolbar.
A group cell (iPad only) can be partially selected, if only part of its devices
is selected. If so, it has slanted strips of bright and dark color.
The number of selected cells is displayed at the bottom of the main view.
To locate the selected cells on the screen, tap on
.
It is also possible to select or deselect NXAMPs and groups from the menu
[Groups & devices...] (see The Groups & devices menu below).
Even if any cell can be selected, only NXAMPs are controllable.
Positioning cells
You can arrange cells as you like. To do so, tap and hold to drag one or
many cells with your fingers. When two cells are close enough, magnets
allow the constitution of stacks, like racks: you can reproduce the
3 From now on, « NXAMP » and « amplifier » are equally used.