A group cell, Vu-meters – Nexo NEMO User Manual
Page 15
NEXO
NeMo User Guide v1.3
Page 15 of 50
displayed.
A device that is not an NXAMP has a cell with the alias only.
A group cell
A group cell has three panes:
In
To monitor the levels of the inputs of the NXAMPs of the group. The
displayed level for an input is the maximum of this input’s levels for the
NXAMPs of the group.
Out
To monitor the output currents and voltages of the processing channels
of the NXAMPs of the group. Again, the displayed levels are the
maximum through the devices of the group. VU-Meters
i
To see some details about the group (setup, load, Dante or EtherSound),
and change its name.
And two buttons:
XX
device(s)
Tapping on this button will display the Quick mute/solo view of the group
(cf.
View
alerts!
Tapping on this button will display the Events menu, filtered so only the
alerts about this group are displayed (cf.
VU-Meters
A VU-meter displays:
Hold of the maximum value (glowing)
Short-term hold of the maximum displayed value
Current value
Hold of the minimum value (glowing)
You can reset the hold values by tapping on any VU-meter.