Avs-service – Nexo NEMO User Manual
Page 7
NEXO
NeMo User Guide v1.3
Page 7 of 50
sources, phones, video senders, wireless speakers and other wireless devices
operating within the 2.4 or 5 GHz bands). To that purpose, you can use a Wi-
Fi scanner software.
In case of high latency while using NeMo, you can reboot the router.
For more information, please consult the router manual, and Apple articles
about recommended settings
1
.
AVS-Service
AuviTran’s AVS-Service must run on a host PC (or Virtual Machine on a Mac).
For this purpose, you need to:
1. Install AVS-Monitor
2
on a computer;
2. Link this computer, preferably with an Ethernet link, to the NXAMPs and
router’s network (a Wi-Fi connection is however possible);
3. Launch
AVS-Control
Panel
(available
at
Start/All
Programs/AuviTran/EtherSound Monitor/);
4. In the Status tab, select the adequate EtherSound and Dante Adapters
(the ones leading to the NXAMPs’ network);
5. Select All in the Software client Adapter list;
6. If needed, check Enable Dante Control in the AVS-Service tab.
7. Start the service by pressing
[Turn ON].
1
Apple, iOS and OS X: Recommended settings for Wi-Fi routers and access points,
iPad: Issues connecting to Wi-Fi networks,
AirPort and Bluetooth: Potential sources of interference
2
AVS-Service is included in AVS-Monitor's download package, available at