Nexo NEMO - Manual (Page 36)

NEXO NeMo User Guide v1.3
Page 36 of 50
interface to manage the iDevice. Press [Apps], and then in the File
sharing section, press NEXO Nemo to display the documents directory.
2. Click on the load(s) (.nxload document) of your choosing and press
[Save as…].
3. Connect your second iDevice to the computer. From iTunes, go to the
interface to manage the iDevice. Press [Apps], and then in the File
sharing section, press NEXO Nemo to display the documents directory.
4. Choose [Open…], or drag the .nxload file(s) previously saved.
5. Go to NeMo on the second iDevice. The Loads menu now contains the
imported load(s).
With Mail, Message or AirDrop:
1. Go to the
Loads menu of the first iDevice.
2. Tap on and select the load(s) you want to export, and tap on
[Share (xx)].
3. In the activity sheet that appears, choose the way you want to share
the selected loads. The corresponding .nxload documents are then
attached to an email or a message, or sent via AirDrop.
4. When the .nxload file is received by the second iDevice, iOS will
suggest you to open it in NeMo.
5. In NeMo, the Loads menu now contains the imported load(s).
AVS-Service settings
NeMo automatically save the IP of the network adapter used by AVS-
Service, that you have entered in the welcome page.
If AVS-Service is secured, NeMo remembers the login, but not the
password. You can choose to remember the password by going to the
Preferences menu and type in your login and password in the Security
section. To stop remembering the password, simply empty the two text
fields.
NETWORK UPDATE
You can freely plug or unplug a device while a session is opened.
However, so they appear or disappear from NeMo, you have to go the
Groups & devices menu, and pull down the table view.
You may observe a delay between the moment you plug or unplug a
device, and the moment it is available to control or disappears. You may
also observe a reduction in control speed right after a device has been
disconnected.
NeMo performs a net reset (same function as the green button at the top-
left corner of AVS-Monitor) every time the app connects for the first time