Nexo NEMO - Manual (Page 22)

NEXO NeMo User Guide v1.3
Page 22 of 50
THE CONTROL TAB
Tap on the Control tab. The main view shows a desk where the
parameters of the selected NXAMPs are monitored and controlled (see
Important: selected above).
In landscape mode: inputs are on the left-hand side (A to D: analog, E to
H: digital from the network, EtherSound™ or Dante™), processing
channels are on the right-hand side (1 to 4).
In portrait mode: inputs are at the top, processing channels at the
bottom.
Each channel is associated with one or two VU-meters, current (A) or
voltage (V).
Setting parameters
iPhone users only:
Channel’s parameters (gain, volume, delay, etc.) cannot be set from the
main view. To access the channel view, tap on a channel (several
channels if you want to control them simultaneously). The title of the
newly displayed view reminds you which channels have been selected.
You can control 1 to 4 channels simultaneously. Tap on the return button
to pop back to the main view.
Before performing any setting, make sure that the selected channels are
really the ones you want to control.
All users:
Parameters can be set the following way:
Patching
To link an input to a processing channel, simply drag your finger from the
one to the other.
To undo a link, drag again from an input to a channel or conversely.
You can also undo several links by dragging your finger across them.