Nexo NEMO - Manual (Page 16)

NEXO NeMo User Guide v1.3
Page 16 of 50
Important: latency
Since there may be latency on the wireless network, commands are likely not to
be taken immediately in account by a NXAMP. For instance, it is not abnormal to
wait half a second from the moment you tap on a mute button and the one it is
effectively blue.
All displayed values are the one that are read from the NXAMPs (except when
your finger is on the thumb of a slider for instance, and except if the link with the
service is broken).
An activity indicator is displayed at the bottom-left corner of the main view, when
the value of a parameter is being sent and processed by NXAMPs. When it is
hidden, you can be sure the value you expected has been taken in account. This
indicator is also visible when network updates takes more time than usual (more
than 5s).
Zoom in and out
You can change the scale of the main view with two fingers getting
closer (zoom out), or opening (zoom in). You can reset the zoom scale
by double-tapping anywhere except on a cell.
Scrolling
You can scroll the main view to reveal cells that may not be visible,
simply by dragging a finger (anywhere but on a cell). In the editing mode
(after tapping on
[Edit]), if background images are too big, you can use
two fingers to scroll.
Locking the map
You can lock the map of the devices or of the groups, by tapping on in
the toolbar. Tap again on
to unlock. When the map is locked, no cell can
be moved.
Background images
You can add background images, taken from your iDevice's picture
library. For instance, with the built-in camera of the iDevice, you can take
a picture of the stage, or of NXAMPs racks, load it into NeMo as a
background image, and place amplifier cells so that you find your way
around.
The background images are the same for the map of the devices as for
the map of the groups.