Brocade FastIron Ethernet Switch Layer 3 Routing Configuration Guide - Manual (Page 656)

View all configured VRFs in summary mode
To see all configured VRFs in summary mode, enter the show vrf command. The following is an
example of the output.
Brocade# show vrf
Total number of VRFs configured: 2
Status Codes - A:active, D:pending deletion, I:inactive
Name Default RD vrf|v4|v6 Routes Interfaces
green 1:1 A | A| A 12 ve111 ve211 ve311*
red 10:12 A | A| A 4 ve1117 port-id tn1*
Total number of IPv4 unicast route for all non-default VRF is 8
Total number of IPv6 unicast route for all non-default VRF is 8
Syntax: show vrf
View specific VRF in detail mode
To see a specific VRF in detail mode, enter the show vrf detail vrf command. The following is an
example of the output.
Brocade# show vrf green
VRF green, default RD 1:1, Table ID 1
IP Router-Id: 1.1.1.1
Interfaces: ve111 ve211 ve311 ve1116 ve2115
Address Family IPv4
Max Routes: 5500
Number of Unicast Routes: 6
Address Family IPv6
Max Routes: 400
Number of Unicast Routes: 6
Syntax: show vrf detail vrf-name
View all configured VRFs in detail mode
To see all the configured VRFs in detail mode, enter the show vrf detail command. The following is
an example of the output.
Brocade# show vrf detail
Total number of VRFs configured: 2
VRF green, default RD 1:1, Table ID 1
IP Router-Id: 1.1.1.1
Interfaces: Use "show vrf green" to see the list of interfaces
Address Family IPv4
Max Routes: 5500
Number of Unicast Routes: 6
Address Family IPv6
Max Routes: 400
Number of Unicast Routes: 6
VRF red, default RD 10:12, Table ID 2
IP Router-Id: 1.1.17.1
Interfaces:
Use "show vrf red" to see the list of interfaces
Address Family IPv4
Max Routes: 300
Number of Unicast Routes: 2
Address Family IPv6
Max Routes: 70
Number of Unicast Routes: 2
Total number of IPv4 unicast route for all non-default VRF is 8
Total number of IPv6 unicast route for all non-default VRF is 8
View all configured VRFs in summary mode
656 FastIron Ethernet Switch Layer 3 Routing Configuration Guide
53-1003087-04