Brocade VDX 6730 Hardware Reference Manual (Supporting VDX 6730-32 and VDX 6730-76) - Manual (Page 59)

Brocade VDX 6730 Hardware Reference Manual 41
53-1002389-06
Replacing a combined FRU in a Brocade VDX 6730-32
5
a. Orient the new power supply and fan assembly with the captive screw on the right as
shown in Figure 14 or Figure 15 .
CAUTION
Do not force the installation. If the power supply and fan assembly does not slide in easily, ensure
that it is correctly oriented before continuing.
b. Gently push the power supply and fan assembly into the chassis until it is firmly seated.
c. Using the Phillips screwdriver, secure the power supply and fan assembly to the chassis by
tightening the captive screw.
FIGURE 14 Orientation of the AC power supply and fan assembly in the Brocade VDX 6730-32
1 Brocade VDX 6730-32 chassis 3 Label with part number
2 AC power supply and fan assembly 4 Captive screw
P/N: xxxxxxx-xx
3 4 1 2