Brocade Multi-Service IronWare Routing Configuration Guide (Supporting R05.6.00) - Manual (Page 252)

224 Multi-Service IronWare Routing Configuration Guide
53-1003033-02
Displaying OSPF information
Displaying OSPF interface brief information
The following command introduced in version 03.3.00 is used to display the OSPF database brief
information.
Brocade# show ip ospf interface brief
Number of Interfaces is 1
Interface Area IP Addr/Mask Cost State Nbrs(F/C)
eth 1/2 0 10.1.1.2/24 1 down 0/0
Table 27 defines the fields shown in the above example output of the show ip ospf interface brief
command.
DR The router ID (IPv4 address) of the DR.
BDR The router ID (IPv4 address) of the BDR.
Neighbor Count The number of neighbors to which the interface is connected.
Adjacent Neighbor
Count The number of adjacent neighbor routers.
Neighbor: The IP address of the neighbor.
TABLE 27 Output of the show ip ospf interface brief command
This field Displays
Interface The interface through which the router is connected to the neighbor.
Area The OSPF Area that the interface is configured in.
IP Addr/Mask The IP address and mask of the interface.
Cost The configured output cost for the interface.
TABLE 26 Output of the show ip ospf interface command (Continued)
This field Displays