Brocade Multi-Service IronWare Routing Configuration Guide (Supporting R05.6.00) - Manual (Page 646)

618 Multi-Service IronWare Routing Configuration Guide
53-1003033-02
show ipv6 bgp vrf neighbors
Last Connection Reset
Reason (cont.)
•
Reasons specific to the implementation:
•
Reset All Peer Sessions
•
User Reset Peer Session
•
Port State Down
•
Peer Removed
•
Peer Shutdown
•
Peer AS Number Change
•
Peer AS Confederation Change
•
TCP Connection KeepAlive Timeout
•
TCP Connection Closed by Remote
•
TCP Data Stream Error Detected
Notification Sent When the device receives a NOTIFICATION message from the neighbor, the message
contains an error code corresponding to one of the following errors. Some errors have
subcodes that clarify the reason for the error. Where applicable, the subcode
messages are listed underneath the error code messages.
•
Message Header Error:
•
Connection Not Synchronized
•
Bad Message Length
•
Bad Message Type
•
Unspecified
•
Open Message Error:
•
Unsupported Version
•
Bad Peer As
•
Bad BGP Identifier
•
Unsupported Optional Parameter
•
Authentication Failure
•
Unacceptable Hold Time
•
Unspecified
•
Update Message Error:
•
Malformed Attribute List
•
Unrecognized Attribute
•
Missing Attribute
•
Attribute Flag Error
•
Attribute Length Error
•
Invalid Origin Attribute
•
Invalid NextHop Attribute
•
Optional Attribute Error
•
Invalid Network Field
•
Malformed AS Path
•
Unspecified
•
Hold Timer Expired
•
Finite State Machine Error
•
Cease
•
Unspecified
Notification Received See above.
Neighbor NLRI
Negotiation Shows the state of the router’s NLRI negotiation with the neighbor. The states can be
one of the following:
•
Peer negotiated IPv4 unicast capability
•
Peer negotiated IPv6 unicast capability
•
Peer configured for IPv4 unicast routes
•
Peer configured for IPv6 unicast routes
Output field Description