Brocade Multi-Service IronWare Routing Configuration Guide (Supporting R05.6.00) User Manual
Page 504
476
Multi-Service IronWare Routing Configuration Guide
53-1003033-02
Displaying global IPv6 information
TABLE 89
Specific IPv6 TCP connection fields
This field...
Displays...
TCB = location
The location of the TCB.
local-ip-address local-port-number
remote-ip-address remote-port-number state port
This field provides a general summary of the following:
•
The local IPv4 or IPv6 address and port number.
•
The remote IPv4 or IPv6 address and port number.
•
The state of the TCP connection. For information on
possible states, refer to
•
The port numbers of the local interface.
Send: initial sequence number = number
The initial sequence number sent by the local device.
Send: first unacknowledged sequence number =
number
The first unacknowledged sequence number sent by the
local device.
Send: current send pointer = number
The current send pointer.
Send: next sequence number to send = number
The next sequence number sent by the local device.
Send: remote received window = number
The size of the remote received window.
Send: total unacknowledged sequence number =
number
The total number of unacknowledged sequence numbers
sent by the local device.
Send: total used buffers number
The total number of buffers used by the local device in
setting up the TCP connection.
Receive: initial incoming sequence number =
number
The initial incoming sequence number received by the local
device.
Receive: expected incoming sequence number =
number
The incoming sequence number expected by the local
device.
Receive: received window = number
The size of the local device receive window.
Receive: bytes in receive queue = number
The number of bytes in the local device receive queue.
Receive: congestion window = number
The size of the local device receive congestion window.