Brocade Multi-Service IronWare Routing Configuration Guide (Supporting R05.6.00) - Manual (Page 43)

Multi-Service IronWare Routing Configuration Guide 15
53-1003033-02
Configuring BGP4
Table 3 shows the commands that are available at the various BGP4 configuration levels.
TABLE 3 IPv4 BGP4 commands for different configuration levels
Command Global
(iPv4 and
IPv6) IPv4 address
family unicast IPv4 address
family
multicast See
address-family x x x “Entering and exiting the address family
configuration level”
on page 19
aggregate-address x x “Aggregating routes advertised to BGP4
neighbors”
on page 19
always-compare-med x “Configuring the device to always compare
Multi-Exit Discriminators”
on page 20
always-propagate x
as-path-ignore x “Disabling or re-enabling comparison of the
AS-Path length”
on page 21
bfd x
bfd-enable x
bgp-redistribute-internal x “Redistributing IBGP routes” on page 21
client-to-client-reflection x x x “Disabling or re-enabling client-to-client route
reflection”
on page 25
cluster-id x “Configuring a route reflector” on page 25
compare-med-empty-as
path x “Configuring the device to always compare
Multi-Exit Discriminators”
on page 20
compare-routerid x “Enabling or disabling comparison of device
IDs”
on page 26
confederation x “Configuring confederations” on page 26
dampening x x “Configuring route flap dampening” on
page 37
default-information-origi
nate x x “Originating the default route” on page 38
default-local-preference x “Changing the default local preference” on
page 38
default-metric x x “Changing the default metric used for
redistribution”
on page 39
distance x “Changing administrative distances” on
page 39
enforce-first-as x “Requiring the first AS to be the neighbor AS”
on page 40
exit-address-family x x x “Entering and exiting the address family
configuration level”
on page 19
fast-external-fallover x “Enabling fast external fallover” on page 42
graceful-restart x “Configuring BGP4 Restart” on page 111
install-igp-cost x
local-as x “Setting the local AS number” on page 42