Brocade Multi-Service IronWare Routing Configuration Guide (Supporting R05.6.00) - Manual (Page 510)

482 Multi-Service IronWare Routing Configuration Guide
53-1003033-02
Displaying global IPv6 information
Syntax: show ipv6
Displaying IPv6 interface information for Router
Advertisement Options
Run the show ipv6 interface command to display IPv6 interface information about the newly
configured DNS recursive server addresses, domain name suffixes, and the corresponding lifetime
values on an IPv6 host network.
Brocade# show ipv6
Global Settings
IPv6 Router-Id: 2.2.2.1 load-sharing path: 4
unicast-routing enabled, ipv6 allowed to run, hop-limit 64
reverse-path-check disabled
host drop cam limit disabled
urpf-exclude-default disabled
session-logging-age 5
No Inbound Access List Set
No Outbound Access List Set
source-route disabled, forward-source-route disabled, icmp-redirect disabled
OSPF (default VRF): enabled
BGP: enabled, 1 active neighbor(s) configured
ND6 RA DNS Attributes
ipv6 nd ra-dns-server abcd:abcd:abcd::3 lifetime 122
ipv6 nd ra-dns-server 1::1 lifetime 150
ipv6 nd ra-dns-server abcd:abcd:abcd::2 lifetime 196
ipv6 nd ra-dns-server abcd:abcd:abcd::1 lifetime 200
ipv6 nd ra-domain-name brocade.com.abc.123.abbbc lifetime 102
ipv6 nd ra-domain-name abc-011223.brocade.com lifetime 141
ipv6 nd ra-domain-name abc.com lifetime 155
ipv6 nd ra-domain-name abcd.com.abc.123 lifetime 200
Brocade#