Brocade ICX 6430-C Compact Switch Hardware Installation Guide - Manual (Page 20)

Summary of installation tasks
Installation tasks TABLE 5
Task number Task Where to find more information
1 Ensure that the physical environment that will host the
device has the proper cabling, ventilation, and clearance. Preparing the installation site on page
19
2 Unpack the device and all included accessories, Items included with an ICX 6430-C
device
on page 17
3 Install the device on a desktop, in an equipment rack, on
a wall, or on a metal surface. Installing the device on page 20
4 Once the device is installed, plug the device into a
nearby power source that adheres to the regulatory
requirements outlined in this manual. Powering on the system on page 35
Installation precautions
Follow all precautions when installing a device.
General precautions
DANGER
All fiber-optic interfaces use Class 1 lasers.
CAUTION
Do not install the device in an environment where the operating ambient temperature might
exceed 40 ο C (104 ο F).
CAUTION
Make sure the airflow around the front, sides, and back of the device is not restricted.
CAUTION
Never leave tools inside the device.
Summary of installation tasks
18 Brocade ICX 6430-C Compact Switch Hardware Installation Guide
53-1003080-01