Brocade ICX 6430-C Compact Switch Hardware Installation Guide - Manual (Page 29)

1. Using a Phillips screwdriver, attach the wall mount brackets to the sides of the device using four
sink-head screws.
FIGURE 13 Attaching the wall mount brackets for an ICX 6430-C device
2. Drill two holes on the wall where you want to mount the device.
3. Hammer two wall mount anchors into the holes on the wall.
4. Use the two wall mount screws to fasten the device to the wall mount anchors.
ICX6430-C Installation
Brocade ICX 6430-C Compact Switch Hardware Installation Guide 27
53-1003080-01