Powering on the system – Brocade ICX 6430-C Compact Switch Hardware Installation Guide User Manual
Page 37
Advertising
Powering on the system
After you complete the physical installation, you can power on the system.
NOTE
The socket should be installed near the equipment and should be easily accessible.
1.
Remove the power cord from the shipping container.
2.
Attach the AC power cord to the AC connector on the rear panel.
3.
Insert the power cord plug into a 100V-240V outlet.
NOTE
To turn the system off, simply unplug the power cord or cords.
Powering on the system
Brocade ICX 6430-C Compact Switch Hardware Installation Guide
35
53-1003080-01
Advertising