Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) User Manual
Page 221
Brocade Mobility 5181 Access Point Product Reference Guide
207
53-1002516-01
Network Commands
8
Example
admin(network.lan)>
admin(network.lan)>set lan 1 enable
admin(network.lan)>set name 1 engineering
admin(network.lan)>set ethernet-port-lan 1
admin(network.lan)>set timeout 45
admin(network.lan)>set trunking 1 disable
admin(network.lan)>set auto-negotiation disable
admin(network.lan)>set speed 100M
admin(network.lan)>set duplex full
admin(network.lan)>set dns 1 192.168.0.1
admin(network.lan)>set dns 2 192.168.0.2
admin(network.lan)>set wins 1 192.168.0.254
admin(network.lan)>set trunking disable
admin(network.lan)>set username phil
admin(network.lan)>set passwd ea0258c1
Related Commands
For information on configuring the LAN using the applet (GUI), see
“Configuring the LAN interface”
duplex
<mode>
Defines the access point LAN port duplex as either half or full.
username
<name>
Specifies the user name for 802.1x port authentication over the LAN
interface.
passwd
<password> The 0-32 character password for the username for the 802.1x port.
ip-mode
<ip>
Defines the Mobility 5181 Access Point LAN port IP mode.
ipadr
<ip>
Sets the IP address used by the LAN port.
mask
<ip>
Defines the IP address used for Mobility 5181 Access Point LAN port
network mask.
dgw
<ip>
Sets the Gateway IP address used by the LAN port.
domain
<name>
Specifies the domain name used by the Mobility 5181 Access Point
LAN port.
dns
<ip>
Defines the IP address of the primary and secondary DNS servers used
by the LAN port.
wins
<ip>
Defines the IP address of the WINS server used by the LAN port.
show
Shows the current settings for the Mobility 5181 Access Point LAN port.