System network time protocol (ntp) commands, Br5181>admin(system.ntp)> show – Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) User Manual
Page 351
Brocade Mobility 5181 Access Point Product Reference Guide
337
53-1002516-01
System Commands
8
System Network Time Protocol (NTP) Commands
BR5181>admin(system)> ntp
Description
Displays the NTP menu. The correct network time is required for numerous functions to be
configured accurately on the Mobility 5181 Access Point.
Syntax
For information on configuring NTP using the applet (GUI), see
“Configuring Network Time Protocol
BR5181>admin(system.ntp)> show
Description
Displays the NTP server configuration.
Syntax
Example
admin(system.ntp)>show
current time (UTC)
: 2006-07-31 14:35:20
Time Zone:
ntp mode
: enable
preferred Time server ip
: 203.21.37.18
preferred Time server port
: 123
first alternate server ip
: 203.21.37.19
first alternate server port
: 123
second alternate server ip
: 0.0.0.0
second alternate server port
: 123
synchronization interval
: 15 minutes
show
Shows NTP parameters settings.
date-zone
Show date, time and time zone.
zone-list
Displays list of time zones.
set
Sets NTP parameters.
..
Goes to the parent menu.
/
Goes to the root menu.
save
Saves the configuration to system flash.
quit
Quits the CLI.
show
Shows all NTP server settings.