Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 353)

Brocade Mobility 5181 Access Point Product Reference Guide 339
53-1002516-01
System Commands
8
Syntax
Example
admin(system.ntp)>set mode enable
admin(system.ntp)>set server 1 203.21.37.18
admin(system.ntp)>set port 1 123
admin(system.ntp)>set intrvl 15
admin(system.ntp)>set zone 1
For information on configuring NTP using the applet (GUI), see “Configuring Network Time Protocol
(NTP)” on page 76.
set mode <ntp-mode> Enables or disables NTP.
server <idx> <ip> Sets the NTP sever IP address.
port <idx> <port> Defines the port number.
intrvl <period> Defines the clock synchronization interval used between the Mobility 5181 Access
Point and the NTP server in minutes (15 - 65535).
time <time> Sets the current system time. [yyyy] - year, [mm] - month, [dd] - day of the month, [hh]
- hour of the day, [mm] - minute, [ss] second, [zone -idx] Index of the zone.
zone <zone> Defines the time zone (by index) for the target country.