Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 243)

Brocade Mobility 5181 Access Point Product Reference Guide 229
53-1002516-01
Network Commands
8
Network WAN, VPN Commands
BR5181>admin(network.wan.vpn)>
Description
Displays the VPN submenu. The items available under this command include:
For an overview of the VPN options available using the applet (GUI), see “Configuring VPN tunnels”
on page 151.
BR5181>admin(network.wan.vpn)> add
Description
Adds a VPN tunnel entry.
Syntax
Example
admin(network.wan.vpn)>add 2 SJSharkey 209.235.44.31 206.107.22.46
255.255.255.224 206.107.22.1
If tunnel type is Manual, proper SPI values and Keys must be configured after
adding the tunnel
admin(network.wan.vpn)>
add Adds VPN tunnel entries.
set Sets key exchange parameters.
delete Deletes VPN tunnel entries.
list Lists VPN tunnel entries
reset Resets all VPN tunnels.
stats Lists security association status for the VPN tunnels.
ikestate Displays an Internet Key Exchange (IKE) summary.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the configuration to system flash.
quit Quits the CLI.
add <name> <subnet-idx> <local WAN IP> <remote subnet> <remote subnet mask> <remote gateway>
Creates a tunnel <name> (1 to 13 characters) to gain access through local WAN IP <local WAN IP>
from the remote subnet with IP address <remote subnet> and subnet mask <remote subnet
mask> using the remote gateway <remote gateway>.