Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 268)

254 Brocade Mobility 5181 Access Point Product Reference Guide
53-1002516-01
Network Commands
8
Note: The WEP
authentication
mechanism saves up to
four different keys (one
for each WLAN). It is not
requirement to set all
keys, but you must
associate a WLAN with
the same keys.
enc <idx> <type> Sets the encryption type
to <type> (one of none,
wep40, wep104,
keyguard, tkip, or ccmp)
for WLAN <idx>.
wep-keygu
ard passkey <passkey> The passkey used as a
text abbreviation for the
entire key length (4-32).
index <key index> Selects the
WEP/KeyGuard key (from
one of the four potential
values of <key index>
(1-4).
hex-key <kidx> <key
string> Sets the WEP/KeyGuard
key for key index <kidx>
(1-4) for WLAN <kidx> to
<key string>.
ascii-key <kidx> <key
string> Sets the WEP/KeyGuard
key for key index <kidx>
(1-4) for WLAN <kidx> to
<key string>.
mixed-mode <mode> Enables or disables
interoperation with
WEP128 clients.
Note: TKIP parameters
are only affected if "tkip"
is selected as the
encryption type.
tkip rotate-mode <mode> Enables or disabled the
broadcast key.
interval <time> Sets the broadcast key
rotation interval to
<time> in seconds
(300-604800).