Burcam 506518SS SW STAINLESS STEEL JET PUMP 3/4HP 115/230V - Manual (Page 7)

Well point optionnal installation
STEP 3
Cut poly pipe
and install the
foot valve.
STEP 4
Install well seal and
piping into well casing.
STEP 5
Install your pump and thread
an adaptor into inlet.
STEP 6
Cut poly pipe and
connect both ends.
STEP 7
You may install one or more sand points
to increase the supply of water.
Check valve, close
to pump.
SHALLOW WELL APPLICATION
STEP 2
Cut poly pipe and
install the foot valve.
7