Inserting and removing the battery pack – Elitegroup G733 User Manual
Page 27
Inserting and Removing the Battery Pack
The battery pack should already be inserted in your Notebook computer when you unpack it. If not
inserted, follow these directions:
1.
Turn over the notebook with the front of the unit facing you and place it on a solid, flat surface.
2.
Angle the battery into the bay. The front edge of the battery should slide into the grooves in
the system case.
3.
2.
Gently lower the battery into the bay and push it until it clicks securely in the bay.
To remove the battery pack:
1.
Turn off the notebook, and disconnect the AC adapter. Close the LCD panel and turn it over
and place it on a solid, flat surface.
Lift the release latch to release the battery from the bay. At this time the battery will now be
angled slightly out of the bay.
19