Elitegroup G733 - Manual (Page 73)

Unscrew and remove the cover of the CPU compartment.
Remove all the screws attached to the heatsink.
Before removing the screws, there are certain measures to followed in removing the heatsink.
To remove the heatsink, first loosen the screw carefully.
After loosening one screw, be certain that the next to be loosen should be the screw on its
adjacent side as shown on the illustration.
Be sure to loosen all the screws first before removing it totally to release
the heatsink. Failure to do so will cause a major damage to the heatsink.
Now you can totally remove all the screws also in that order when you first loosen the screw.
Removing the DVD-ROM/Combo Drive
Remove the screws and push the drive into the direction of the arrow as described in the
illustration.
65