Battery low warning, Small battery for the real time clock, Resetting the system – Elitegroup G733 User Manual

Page 36

Advertising
background image

This applet also displays a meter that indicates how much charge is remaining in the battery.

Battery Low Warning

When the pack initially reaches the “Battery Low” state approximately 10 ~ 15 minutes of the usable
battery life is left.

You will hear an audible beep signal every 5 seconds alerting you to the “Battery Low” status. When
the battery power reaches the “Battery Low Low” status the beeping sound will accelerate.

Your battery now has 1 ~ 2 minutes of battery charge remaining. You must save your data or connect
AC power immediately; otherwise, you may lose your data.

Sound

Meaning

Continuous beeping every
5 seconds

Battery Low: Indicates that there is 7 to 10 minutes charge
remaining.

Continuous beeping sound
every 1 second

Battery Low Low: Indicates that there is 1 to 2 minutes of
battery charge remaining. Save your work and turn off the
Notebook, or connect the AC adapter.

When there is only one minute of battery charge remaining, the Notebook will suspend to the HDD
and power off. You should connect AC power and resume to save your work.

Small Battery for the Real Time Clock

There is a small built-in battery pack that supplies power to the system in order to maintain certain
system information while the power is off. If the Notebook is left without a power source for long
period of time, this battery will be exhausted and system information will be lost.

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type
recommended by the manufacturer. Dispose of used batteries according to the manufacturer's
instructions. Never remove the battery pack while the power is on as this may result in data loss when
the system loses power.

Resetting the System

After installing a software application package, you may be prompted to reset the system to load the
changed operating environment. To reset the system, or “reboot,” press the [Ctrl] + [Alt] + [Delete]
keys simultaneously. This is known as “warm boot.” This key combination acts as “software” reset
switch when you encounter hardware or software problems, which lock up the Notebook.

28

Advertising
This manual is related to the following products: