Apple Mac Pro RAID Card and Battery - Manual (Page 3)

073-1251 Rev. A 3 © 2009 Apple Inc. All rights reserved.
5
Using Phillips #1
screwdriver, loosen 2
captive screws
securing card’s
bracket to enclosure.
Remove bracket from
6
enclosure.
Note: Card is held in place
by retention bar. Following
two steps explain how to
release bar.
7
Press button on PCI
slider.
Move slider to left,
8
which releases card’s
retention bar.
Holding card by top
9
corners, gently pull up
and remove card from
computer.
Note: When removing
or installing card, handle
it only by the edges. Do
not touch its connectors
or any components. Lift
card straight out from
connector to remove it,
and insert it straight into
connector to install it.