Apple Mac Pro RAID Card and Battery - Manual (Page 5)

073-1251 Rev. A 5 © 2009 Apple Inc. All rights reserved.
Installing the
Replacement
RAID Card and
Battery
Note: Mac Pro RAID Card
must always be installed
in PCI slot 4.
Align card’s connector
1
with PCI slot 4 and
press until connector
is inserted all the way
into slot. Make sure
card also engages
in slot 4 of PCI card
guide.
Press button on PCI
2
slider.
Move slider to right to
3
secure card.
4
Replace PCI bracket
and tighten screws.
Note: Slide bracket
under circled tab.
Note: System Profiler
does not display the
serial number for the Mac
Pro RAID Card. You can
find the serial number
by checking the serial
number sticker on the
back of the card.