FallTech 778100 - Manual (Page 16)

Inspection Log
FallTech EcoAnchor
Model #:_______________
Serial #:_______________
Mfg. Date:_____________
Inspection
Date
Inspector Comments Pass/Fail Corrective
Action to be
Taken
Approved
By
Section 9: Maintenance and Storage
The service life of your FallTech EcoAnchor will depend on two factors:
The environmental conditions of your working environment along with
proper care (specifically, maintenance and storage).
Keeping the EcoAnchor clean and free of contaminants will greatly
increase the service life and will ensure that the EcoAnchor will be in
proper working order in the event that you need it to arrest a fall. The
following steps should be taken periodically:
1. Using a damp rag and a mild soap and water solution, wipe
down the surface EcoAnchor to remove soil and surface
contaminants. Ensure that the labels are legible at all times.
2. Use a damp rag to clean the surfaces of any connecting
hardware.
3. If there is an excessive build up of paint, oil, dirt tar or other
contaminants that cannot be removed, remove the EcoAnchor
from service and have it replaced.
4. Do not attempt to use any lubricants or solvents on any part of
the EcoAnchor. Store in a cool, dry location away from direct
sunlight and where it will not be exposed to chemical vapors.
5. This EcoAnchor should be allowed to air dry after use and
should then be rolled up and kept in the storage bag.
6. Do not throw the EcoAnchor into a pile or a locker or storage
box, as this may cause damage.
Provided your EcoAnchor passes inspection, has been properly
maintained, has not been involved in arresting a fall and is in serviceable
condition, it will be suitable for use. If your EcoAnchor is in need of
repair or you are concerned about its condition, return it to the place of
purchase to arrange an inspection and/or repair through an authorized
service center. For further details, contact FallTech.
Section 10: Specifications
This section contains important information regarding the
performance and construction of this product. Pease read and be
familiar with this and all information contained in this instruction manual.
10.1: Mandatory Disclosures
This instruction manual addresses foreseeable hazards, uses and
applications. If you have questions about your application that are not
addressed in this document, contact FallTech for additional guidance.