FallTech 778100 - Manual (Page 4)

 Tie-back with your FallTech SAL is a forbidden connection except
for model # 7241, 7241Y, 8241 and 8241Y in the WrapTech series.
 Connecting to any ring or structure that does not fully captivate
and completely restrict the movement your connector is a
forbidden connection.
Section 2: ABCD’s
Every Personal Fall Arrest System consists of four basic elements –
Anchorage, Body-wear, Connectors/Connecting Devices and
Deceleration Devices. Each of these four elements is discussed in
greater detail below. If, after reading though this section, you do not fully
understand these items and how they work together to form a compatible
fall arrest system, please be sure to have this explained to you by a
Competent Person.
It is absolutely critical that you be familiar with the proper wear and/or
use of each component of your Personal Fall Arrest System (PFAS).
Failure to read, understand and adhere to instructional materials and
warnings provided with each of these components could lead to a
catastrophic failure of your PFAS, resulting in serious injury or death.
2.1: Anchorage
The selection of an anchor point and anchorage connector is critical
to the successful function of any Personal Fall Arrest System (PFAS).
OSHA 1926.502 (d) (15) states that:
“Anchorages used for attachment of personal fall arrest equipment shall be
independent of any anchorage being used to support or suspend platforms and
capable of supporting at least 5,000 pounds (22.2 kN) per employee attached, or
shall be designed, installed, and used as follows: as part of a complete personal
fall arrest system which maintains a safety factor of at least two; and under the
supervision of a qualified person.”
Ensure that the structure to which you are attaching your anchorage
connector is capable of meeting the above requirements and that your
anchorage connector is installed in accordance with the manufacturer’s
instructions. Also be sure to check that the anchorage connector is
compatible with your connecting device (lanyard, SRL, vertical
lifeline)and that it securely retains the connecting device without
inhibiting its function. If you are unable to determine whether your
connecting device and your anchorage are compatible, please
immediately consult with a competent person or your immediate
supervisor. For more details on anchorages, please see section 5 of this
instruction manual.
2.2: Body-wear
Body wear for any application where this Beam Anchor is to be used
will be defined as a full body harness specifically manufactured for fall
arrest. If being used for restraint applications where the user is restricted
from reaching a fall hazard, a body belt may be used as an alternative.
Be sure to read and follow the manufacturer’s instructions included with
your full body harness or restraint belt at the time of purchase.
2.3: Connectors/Connecting Devices
Connectors and Connecting Devices are terms that are sometimes
used interchangeably. It is important to note the differences between
these two terms in order to help distinguish the parts that these
components play in the rigging of your PFAS. In both cases, these
products/components are required to have a minimum static strength of
5,000 lbs. For additional details on requirements for connectors and
connecting devices, see OSHA 1926.502 at www.osha.gov as
referenced in section 1, advisory #1.
A connector is any metallic, mechanical element such as a
carabiner, snap hook or rebar hook that physically links one or more
elements of a your PFAS together in a manner such that they will remain
engaged to one another unless they are intentionally disengaged.
A connecting device is an element that connects your full body
harness to the anchorage in an effort to ensure that you remain attached
or tethered to the structure upon which you are working. In other words,
the connecting device is that element which secures you to your
anchorage.
2.4: Deceleration Devices
A deceleration device is the element of a Personal Fall Arrest
System (PFAS) which is activated during a fall event and reduces the
forces exerted on the user’s body and on the anchorage during the arrest
of the fall. In the case of Shock-Absorbing Lanyards and Self-Retracting
Lifelines, these products are both a connecting device and a deceleration
device as they will keep you attached to your anchorage and will reduce
the forces on your body in the event of a fall.
2.5: Fall Arrest
Fall Arrest is an area of Fall Protection which focuses on stopping a
fall once it has occurred. Personal Fall Arrest Systems typically consist