Hired-Hand RollSeal Rollup Curtains: ROLLUP CURTAIN SYSTEM Rev 12-07 - Manual (Page 19)

Part No. 4801-5169 Rev 12-07 Rollup Curtain System Page 19
9. Drive Pocket Installation
1. Install the Back Panel by centering on the cabinet and screwing into the cabinet flange.
2. Install the Panel Spacer Bars to the outer edge of the Panel with sheet metal screws. NOTE: The Panel Spacer bars
are larger then the Flange Spacer bars.
3. Install the Front Panel by centering on the cabinet and to the front edge of the cabinet with sheet metal screws.
Detail A
Cabinet
Spacer Bar
Finished Panel Installation
Cabinet
Front Panel
Back Panel
Figure 10