Hired-Hand Farm Hand Series: Heat Zone - Manual (Page 14)

Part No. 4801-5129 rev 6-04 Farm Hand Heat Zone 12
9.3 Connecting to an SCS™ over a Local Network Connection
SCS ™ 16 Stage
SCS ™ 16 Stage
w/Back-Up
To Master
Controller
Pos (+) - Red
Neg (-) – Black
NC- Green
Inset A
Inset B
Inset A Inset B
SCS™ circuit board
Heat Zone
Controller
+
ON AUTO
ON AUTO
Zone 1
Zone 2
Zone 3
Zone 4
4
3
(Zona 1)
(Zona 2)
(Zona 3)
(Zona 4)
R
4501-6074
Directions
Placing switch in the position will prevent the zone from operating.
Placing switch in the position will cause the zone to run continuously.
Placing switch in the position will operate based on the controller.
OFF
ON
AUTO
Farm Hand
Heat Zone
Room Temp Target Temp Zo ne Temps
(Temperatura Cuarto) (Temeratura Optima) (Temeratura Zona) (Modo)
ON AUTO
ON AUTO 2
1
OFF