Lincoln Electric IM621 Mobiflex 200-M K1653-1,-2 - Manual (Page 13)

A-6 INSTALLATION
MObIFLEX 200-M
A-6
INSTALLING THE LAMP OPTIONS
AND ARC SENSOR
(continued)
MAKING THE CONNECTIONS AT THE HOOD
Feed the 13 ft. connecting cable through the hole in
the hood (Fig. 10, Item B).
Have a qualified electrician connect the 13 ft. connect-
ing cable leads, lamp leads, and sensor leads (if
used) to the control board (Fig. 11, Item B). Push the
board onto the bottom of the remote switch (Fig. 11,
Item C). Snap the switch box into place atop the hood.
ELECTRICAL INSTALLATION
Connect the Mobiflex 200-M to 115VAC single phase,
grounded receptacle suitable for 15 amp service.
A B Client: Lincoln/Euromate Client no/project no: 123380/170241-12 Date: 04.12.1997 Drawing no/archive no:lusKK301.eps Version no:1 Illustrator: Jos Taabe Description: demontage afdekplaat.
A
B
Client: Lincoln/Euromate
Client no/project no: 123380/170241-12
Date: 04.12.1997
Drawing no/archive no:lusKK301.eps
Version no:1
Illustrator: Jos Taabe
Description:
demontage afdekplaat.
Fig. 10
WH
BN
GN IMS LAM P WH BN GN BK BK A B C A C To:
Lamp To:
Arc Sensor
(if used) 13 ft.
Connecting
Cable
WH BN GN
IMS
LAM P
WH BN GN BK BK
A
B
C
A
C
To:
Lamp To:
Arc Sensor
(if used)
13 ft.
Connecting
Cable
Fig. 11