Lincoln Electric IM915 POWER FEED 10M SINGLE WIRE FEEDER - Manual (Page 24)

B-2 OPERATION B-2
POWER FEED ® 10M SINGLE WIRE FEEDER
PROCESS LIMITATIONS
The POWER FEED ® 10M Single Wire Feeder is not
suitable for:
• SAW
• GTAW with HF
Not all weld modes or processes described in this manual are avail-
able on all Power Wave
® power sources.
REQUIRED EQUIPMENT
Lincolnʼs POWER FEED ® 10M Single Wire Feeder is
designed for use with the Power Wave family of power
sources. These include:
• Power Wave ® 355 • Power Wave ® 455M CE
• Power Wave ® 455 • Power Wave ® 455M STT
• Power Wave ® 455/STT • Power Wave ® 455M STT CE
• Power Wave ® 455M • Power Wave ® 655
ADDITIONAL REQUIRED EQUIPMENT
• Drive Roll Kits
• Control Cables
• Gun and Cable Assembly
• Weld Wire
• Shielding gas
• Work Cable and Clamp
EQUIPMENT LIMITATIONS
• The POWER FEED ® 10M Single Wire Feeder does
not operate with the Power Wave ® 450.
• The POWER FEED ® 10M Single Wire Feeder does
not operate with any analog based power sources
(CV-xxx machines, DC-xxx machines, etc.)
• The Memory Panel is required to set procedure limits.
• The Boom model does not support push-pull guns
or GTAW welding.
• A push-pull gun and foot amptrol may not be
plugged into the POWER FEED ® 10M Single Wire
Feeder at the same time.
• Spool guns do not operate with the Power Feed ®
10M.
PRODUCT DESCRIPTION
General Physical Description
The POWER FEED ® 10M Single Wire Feeder is a
modular wire feeder, consisting of two components - a
wire drive and a control box - are available assem-
bled as a bench unit or as a boom system. High
speed, highly reliable digital cables connect the com-
ponents together and to the Power Wave power
source.
The POWER FEED ® 10M Single Wire Feeder system
has the ability to connect multiple wire feeders to one
power source, use the same power source to weld in
two different locations (not simultaneously), or load a
different electrode on each feeder to eliminate change
over time.
The powerful four roll wire drive system sets the
industry standard for ease of use. Its patented design
allows for tool-less change out of wire guides and
drive rolls greatly reducing set up time.
General Functional Description
• The POWER FEED ® 10M Single Wire Feeder is a
highly versatile wire feeder with easy to use fea-
tures that make it easy for the operator to adjust the
arc for specific preferences.
• The new MSP4 panel clearly displays key welding
information. Use the MSP4 panel to quickly adjust
weld settings, arc starting parameters, arc end para-
meters and set-up variables.
(For Codes 11377 and below)
• The POWER FEED ® 10M Single Wire Feeder wire
feeder is provided with an infrared red (IR) port.
Transferring welding settings from one wire feeder
to another is accomplished with a common palm
computer.
• When the POWER FEED ® 10M Single Wire Feeder
is coupled to a Power Wave welding power source,
the result is a welding system with absolutely supe-
rior arc performance.
RECOMMENDED PROCESSES
The POWER FEED ® 10M Single Wire Feeder is well
suited for all MIG welding processes, giving premium
arc performance especially with unusual alloys and
out of position work.
• GMAW • SMAW
• GMAW-Pulse • GTAW (Touch Start TIG only)
• GMAW-STT • CAG
• FCAW